
What distinguishes armored wires from those covered with metal? The metal-clad cable has a normal ground wire, whereas the AC cable depends on a jacket together with a wire or thin strip to hold the grounding. This is the primary distinction between the two types of cables.
PVC conduit must be firmly secured within three feet of any outlet box, junction box, device box, conduit body, or other conduit termination, according to section 352.30(A). Conduit that is specified for securing at a height other than three feet may be installed in compliance with the listing."
In actuality, armored or AC cable is known by the brand name BX cable. only like we call any medical adhesive strip Band-Aids, BX cable is only the moniker one industry decided to give their armored cable, and it stuck. Because MC cable is an acronym for "metal clad" or "metallic-sheathed cable," it is simpler to remember.
six feet.MC cable needs to be fastened every six feet or less. All boxes, cabinets, fittings, and other cable terminations must have cables with conductors no bigger than No. 10 AWG fastened to them within 12 inches. Every six feet, an MC cable needs to be supported.
Cables must be fastened at intervals of no more than 1.8 meters, unless otherwise specified (6 ft). Cables with four conductors or less and a maximum size of 10 AWG must be fastened to a box, cabinet, fitting, or other cable termination within 300 mm (12 in.).
When using cable with armor, conduit is usually not needed. On the other hand, conduit must be used for any subterranean installation according to certain municipal codes. Checking local electrical codes is therefore advised before beginning any underground installation.
MC cable, also known as metallic sheathed cable, armored cable (AC), or BX cable, was among the initial cable types created for use in both residential and commercial settings. In the construction of residential, commercial, and industrial buildings, it is still widely utilized today.
3.1. 1 Tidy and Professional Installation: Installing Type MC Cable interlocked armor ground perpendicularly or parallel to walls is required. Diagonal runs are not allowed. The cable must be supported by additional supports when it is exposed.
16–18 inchesStart by placing your electrical cable 16 to 18 inches above the floor, in line with the wall's outlets, as this is the conventional height for doing so. Running electrical line between floors in a house, from a rebuilt second-story room to a basement service panel, is the most complex operation.
The Distance Between Cables Is VitalHeat may result from electrical currents hopping from one cable to the next in this situation. If you must run wires beside each other, make sure they never come into contact with one another and maintain as much space as possible between them.
38