
Direct burial (PVC cover plus THWN or XHHW-2 wire) MC cable is amazing material; it can be run underground, exposed, covered, wet, dry, or even straight into a slab of concrete!
MC cable does not require anti-short bushings; only AC cable does. Installers usually use antishort bushings on both AC and MC cable since MC cable manufacturers frequently include them with the cable.
Indeed, and it's likely that trillions of them are supporting MC cable in buildings all throughout the nation.
Every 6 feet of MC cable needs to be fastened at intervals of no more than 6 feet. All boxes, cabinets, fittings, and other cable terminations must have cables with conductors no bigger than No. 10 AWG fastened to them within 12 inches. Every six feet, an MC cable needs to be supported.
Securing an MC cable is the focus of Section 330.30(B), while making sure the cable is correctly supported is the focus of Section 330.30(C).
Yes, you can install a ground bar and put everything in one box, but if it were my turn, I wouldn't worry about any of those things. You are undoubtedly aware that #10 wire is intended for 30 amps. It's okay if you want to use it for 20 amp circuits, but getting the wiring on the devices will be a nightmare.
Type MC cables need to be supported every six feet or less. Horizontal cables inserted through metal or wooden frame members are supported and secured as long as the support is provided at intervals of no more than six feet [330.30(C)]. Where [330.30(D)]: Type MC cable may be unsupported and insecure
It can be used in damp environments despite having aluminum armor, however a PVC jacket is required for protection. Article 330 of the National Electrical Code (NEC) provides a list of possible uses.
Romex Applications for NM-B. When worn appropriately, MC metal-clad cable is approved for usage in damp environments, however NM-B is not permitted in damp settings. Romex cannot be used outside, however MC metal-clad can be used both indoors and outside. But MC is also utilized indoors more frequently.
No, everything needs to be firmly fixed in place, including raceways, cable assemblies, boxes, cabinets, and fittings. Raceways and cables (power, signaling, or communications) must not be supported by the ceiling-support wires or ceiling grid.
0