Is the first ranking of pesticide residues on fruits and vegetables correct?

Vegetables with leaves

1. Pay special attention to cleaning cabbage, rape, and cabbage (kale).

2, purchased leafy vegetables, spread out and placed for half a day to allow pesticide volatilization to occur.

3, cleaning rape-type vegetables from thewater testing tds meter root up more than part of the cut, allowing each leaf to be scattered and unconnected to the appropriate. It is best to discard the vegetable root.

4, after breaking down the leaf menu, rinse with water because the pesticide will flow downstream to the leaf's root. As a result, the root residual pesticide is stronger.

5, change the water and add the baking soda; soak for about 20 minutes, making sure the water does not cover the vegetables.

6, washed and blanched cauliflower, bok choy, and other blanchable vegetables in boiling water.

Melon and eggplant

1. Cucumber, eggplant, and radish peel after eating; although the eggplant skin is rich in nutrients, it is recommended to peel the skin to eat due to the inability to ensure its safety.

2. The bitter melon is more difficult to clean because pesticide residues are distributed in its bumpy surface and crevices; you must rinse with a toothbrush after running water, plus baking soda soaked. Blanching bitter melon before consumption is advised.

3. Wash cucumber, scrub with a little salt, peel, and eat.

4, peppers and tomatoes sprayed with pesticides from top to bottom, with the tip of the most likely to have residues. When washing to remove the tip, it is best to discard the tip 0.5-1 cm; wash first, then cut, or pesticides will enter through the cut.

The cruciferous group

1. Rinse and soak broccoli in rice water or baking soda for about twenty minutes, then break into small pieces and rinse.

2, then blanch for a few minutes longer, blanch again, and then rinse with water.

Mushrooms s1、

Water with starch, then stir with your hands in one direction in the water to create centrifugal force, making it easier to wash away residue between the seams.

2, thoroughly rinse, boil water for about ten minutes, then rinse with clean water and set aside.


Related Hot Topic

Is bathing safe at 600 TDS?

-350-500: Acceptable: BIS rules state that a TDS level of less than 500 mg/L is acceptable. -500-900: Not a good idea: Use a RO water purifier with a mineralizer or TDS controller. -900-1200: Use of a RO water purifier without a TDS controller or mineralizer is unacceptable.

How can the TDS in my tap water be lowered?

The total dissolved solids in water can be decreased using a reverse osmosis system, water filters, and softeners, among other treatment methods. Reverse osmosis is regarded as one of the greatest methods now in use for lowering the water tds level and satisfying various treated water quality standards.

How much TDS is in Evian water?

345-245 mg/l4. EvianBRAND FEATURES OF EVIAN[Source: Spring]Where to Purchase: Amazon, online water distributors, hotels, restaurants, convenience stores, and grocery storespH = 7.2.Total Dissolved Solids, or TDS 345-245 mg/l

55